Call us:+61 (0) 7 308 54310
Cart 0
100cm wide 1mm Stainless Steel Mesh 25m Zoom

Stainless Steel Fine Mesh 25 metre roll 100cm wide. 1mm Mesh

Available

$468.00
Size : 
Quantity
- +

*Please call to arrange courier

EMFSS10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric field (LF).

Typical application for exterior and or interior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as a flyscreen.

Technical data:

Width: 100 cm

Length: 25 Linear meters roll

Attenuation: 42 dB at 1 GHz (two-layer 60 dB)

Mesh width: 1.0 mm

Wire diameter: 0.16 mm

Material thickness: 0.32 mm

Open area: 70 %

Weight: 260 g/m²

Color: Silver

Fire-proof material, A1 according DIN 4102:1994

Surface conductivity: 0.1 Ohm (square resistance)

  

Application

In the case of using the EMFSS10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the EMFSS10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolted or stapled together. The rule is: Always overlap the single elements at least 5 cm. For grounding use the perforated stainless steel tape EMF ELB by screwing it right across the elements into the surface. 

  

Wire Mesh Installation

For installing under plaster, preferably use a fine and organic filler.

For under-floor covering (laminate, parquet, PVC coating, etc.) the mesh should be fixed with the same adhesive used for the floor covering.

For drywall construction or roof areas the mesh elements can be bolted or stapled together.

Always overlap the single elements by a minimum of 5 cm (2”).

Always ground the wire mesh installation using the following grounding products; screwing it right across the elements into the surface.

https://emfshieldingaustralia.com.au/grounding/229-grounding-set-for-mcl61.html

https://emfshieldingaustralia.com.au/grounding/204-grounding-stainless-steel-tape-for-wiremesh.html

Ensure minimum 5mm (0.2”) clearance around all electrical sockets and fittings.

   

Earthing

Due to the highly conductive surface this material can be contacted and grounded easily to shield low frequency (LF) electric fields. For professional grounding we recommend our Grounding Tape for Wiremesh.

  

Shielding attenuation

The shielding attenuation is regularly tested in our partner laboratory in Munich to the standards ASTM D4935-10 and/or IEEE-STD-299-2006. The line in the diagram stands for the radial direction of polarisation (both directions, horizontal/vertical) and indicates the attenuation achievable in practice. You find the test report above.

Stainless Steel Mesh 1mm EMF Shielding Graph

Updatting...

Stainless Steel Fine Mesh 25 metre roll 100cm wide. 1mm Mesh

Stainless Steel Fine Mesh 25 metre roll 100cm wide. 1mm Mesh

*Please call to arrange courier

EMFSS10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric field (LF).

Typical application for exterior and or interior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as a flyscreen.

Related Products