Call us:+61 (0) 7 308 54310
Cart 0
100cm wide 0.3mm Stainless Steel Mesh 25m Zoom

Stainless Steel Super Fine Mesh 25 m roll 100 cm wide . 0.3 mm mesh

EMFSS03R

Available

$524.00
Quantity
- +

EMFSS03

Protects against low frequency electric fields (LF) and high frequency radiation (HF).

Super finely woven stainless steel gauze. Non corrosive.

Typical application for insect screens, drywall constructions, or interior/ exterior under-plaster in upgraded insulations.

Suitable for making a faraday cage or a smart meter cover

Shields at 55 dB @ 1 GHz. Double layer is 80dB.

Technical data:

100cm wide

25 linear metre roll

Width of mesh hole - 0.3mm

Diameter of wire strand 0.08mm

Material is 0.16mm thick

Open area of material is 54%

Weighs 200gram per sq metre

Silver coloured

Fire-proof material, A1 according DIN 4102:1994

Surface conductivity: 0.03 Ohm (square resistance)

SUITABLE FOR MAKING A FARADAY CAGE OR A SMART METER COVER

 

Application

In the case of using the EMFSS03 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the EMFSS03 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolted or stapled together. The rule is: Always overlap the single elements at least 5 cm. For grounding use the perforated stainless steel tape EMF ELB by screwing it right across the elements into the surface.

  

Wire Mesh Installation

For installing under plaster, preferably use a fine and organic filler.

For under-floor covering (laminate, parquet, PVC coating, etc.) the mesh should be fixed with the same adhesive used for the floor covering.

For drywall construction or roof areas the mesh elements can be bolted or stapled together.

Always overlap the single elements by a minimum of 5 cm (2”).

Always ground the wire mesh installation using the following grounding products; screwing it right across the elements into the surface.

https://emfshieldingaustralia.com.au/grounding/229-grounding-set-for-mcl61.html

https://emfshieldingaustralia.com.au/grounding/204-grounding-stainless-steel-tape-for-wiremesh.html

Ensure minimum 5mm (0.2”) clearance around all electrical sockets and fittings.

   

Earthing/ Grounding

Due to the highly conductive surface this material can be contacted and grounded easily to shield low frequency (LF) electric fields. For professional grounding we recommend our Grounding Tape for Wiremesh.

  

Shielding attenuation

The shielding attenuation is regularly tested in our partner laboratory in Munich to the standards ASTM D4935-10 and/or IEEE-STD-299-2006. The line in the diagram stands for the radial direction of polarisation (both directions, horizontal/vertical) and indicates the attenuation achievable in practice. Test report is above.

Stainless Steel Mesh 0.3 mm EMF Shielding Graph

Updatting...

Stainless Steel Super Fine Mesh 25 m roll 100 cm wide . 0.3 mm mesh

Stainless Steel Super Fine Mesh 25 m roll 100 cm wide . 0.3 mm mesh

EMFSS03

Protects against low frequency electric fields (LF) and high frequency radiation (HF).

Super finely woven stainless steel gauze. Non corrosive.

Typical application for insect screens, drywall constructions, or interior/ exterior under-plaster in upgraded insulations.

Suitable for making a faraday cage or a smart meter cover

Related Products